|
| |
|
VANCE & HINES Fuelpak
Designed to make installation as simple
as possible, the Vance & Hines Fuelpak will increase power and improves
throttle response throughout the entire rpm range.
-
Throttle Position Sensor based
system simplifies the process of fuel-injection tuning
-
Enables fine tuning of the fuel
mixture throughout the entire RPM range
-
Increases power and improves
throttle response
-
No computer or software needed
-
Works with all exhausts systems
-
Includes all necessary mounting
hardware
|
|
Vance & Hines Fuel Pack
2008 - Current Fuel
Injected Models |
Sug. Retail
$279.95
PCS Price $239.95 |
|
|
The New Power Commander V is loaded with tons of
new features for your Road Star FI. Below you will find some Power Commander V features.
- Reduced
size from PCIII USB (less than half of the size of PCIII)
- USB
powered from computer (9 volt adapter is no longer needed for
programming)
- 2
position map switching function built in (map switch not
included)
- Gear
input (allows for map adjustment based on gear and speed)
- Analog
input (allows user to install any 0-5 volt sensor and build an
adjustment table based on its input such as boost or
temperature)
- With gear
position input (sold separately) connected, the PCV is capable of allowing each
cylinder to be mapped individually and for each gear.
- Unit has
a -100/+250% fuel change range (up from -100/+100% on the
PCIII).
- 10
throttle position columns (up from 9 on PCIII USB)
- Enhanced
“accel pump” utility (increased adjustment and sensitivity
ranges)
- Capable
of Auto tuning with the Optional Auto Tune Module shown below.
|
Power Commander V
2008 - Current Fuel
Injected Models |
Sug. Retail
$369.95
PCS Price $324.95 |
|
Power Commander V with Auto Tune package
(shown below)
2008 - Current Fuel
Injected Models |
Sug. Retail
$629.90
PCS Price $549.95 | |
|
The Auto Tune kit monitors the fuel mixture (by
installing the included Wide Band O2 sensor in the exhaust). It then
sends this information to the Power Commander V and automatically
corrects it while you ride. Each map offered has preset Air/Fuel
ratio values included that you'll find to be the best overall
settings. This lets you simply plug in the unit and let it do the
work for you.
|
PC-V Auto Tune Module
2008 - Current Fuel
Injected Models |
Sug. Retail
$259.95
PCS Price $235.95 |
|
|
The PCIII is a fuel injection adjustment unit. It allows you to fine tune the air/fuel mixture. It is an inline system so it just plugs right into your existing harness. This is a must when modifying a fuel injected motorcycle. The kit comes complete with cd-rom containing
many fuel maps already done. They can also be custom mapped to your bike.
|
Power Commander III
2008 - Current Fuel Injected
Models |
Sug. Retail
$349.95
PCS Price $314.95 |
|
 |
-
8 Selectable Advance Curves
-
8 Selectable Rev limits (increased rev limits over stock)
-
Status LED:
- Easier Starting
-
Plug and Ride, 5 Minute Installation (on most models)
-
Uses all Factory Sensors
-
Mounts Directly to Factory Location
-
Uses Factory Coils, or Dyna Coils
-
Reverse Battery Protection
-
Retard Mode for Nitrous or Blower Applications
|
Road Star Dyna 3000
1999-2007 Carbureted Models |
Sug. Retail
$289.95
PCS Price $246.95 |
|
|
COBRA
Fi2000 PowrPro Tuner
The Fi2000 PowrPro fuel-injection tuner uses
the latest smart chip technology to
continuously read the bike's EFI delivery at
up to 80 times per second every time the
throttle is opened to optimize the air/fuel
mixture at all throttle settings. With its
Continuously Variable Tuning (CVT) (patent
pending) technology, the PowrPro will
revolutionize motorcycle fuel-injection
tuning.
With PowrPro you can
say good-bye to old-school EFI "mapping
mania" and O2 sensor hassles forever. When
your bike accelerates, PowrPro reads the
engine's performance up to 80 times per
second to optimize fuel delivery at all
throttle openings under acceleration, under
every kind of load and under all existing
environmental conditions to deliver maximum
acceleration.
And no matter which
components you change in the future, whether
it's a new exhaust system, a freer-flowing
air filter setup or even a big-bore hop-up
kit with new camshafts, PowrPro continues to
analyze and tune your engine for peak
performance.
|
|
Cobra Fi2000 PowrPro
2008 - Current Fuel Injected
Models |
Sug. Retail
$599.95
PCS Price $549.95 |
|
|
Fi2000R O2
Current motorcycle engines
utilizing oxygen sensors and closed loop
technology have very lean air/fuel mixture
settings from the factory. These settings
can limit power and make the engines run
hotter than earlier model-year units. The
Fi2000R O2 digital fuel processor is
designed to work with all exhaust systems
(stock or aftermarket) equipped with oxygen
sensors in place. It accurately adjusts the
fuel-injected engine's air/fuel ratio in
order for it to run properly.
|
|
Cobra Fi2000R O2
2008 - Current Fuel Injected
Models |
Sug. Retail
$279.95
PCS Price $249.95 |
|
|
Fi2000R
Cobra's FI2000R takes the
worry out of tuning your fuel-injected
cruiser. Plug and ride with OEM connectors.
|
|
Cobra Fi2000R
2008 - Current Fuel Injected
Models |
Sug. Retail
$234.95
PCS Price $199.95 |
|
|
Ness Big
Shot
The Arlen Ness Big Shot
offers Plug and Play installation with the
easiest way to tune your fuel injected bike for
performance modifications available. Simply
press a few buttons and your ready to go.
- No Splicing wires for installation
- No laptop or dyno required for tuning
- Uses load based sensing technology for
optimizing fuel
- Pre Loaded with base map, but can be tuned for
your individual bike
|
|
Ness Big Shot
2008 - Current Fuel Injected
models
not for use with California models |
Sug. Retail
$299.95
PCS Price $269.95 |
|
22-010, AT-200, 431-411, 65011, 92-1771AT, 92-1771CL, 92-1771,
M-1803, D3K7-3
| |
|
Join
Email List
