Yamaha V Star 950
Dynojet Ignition and Tuners

Yamaha V Star 950 Power Commander V 22-009

V Star 950 Power Commander 5 (fuel only)

The New Power Commander V is loaded with tons of new features for your V Star 950. Below you will find some Power Commander V features.

USB powered from computer (9 volt adapter is no longer needed for programming)
2 position map switching function built in (map switch not included)
Gear input (allows for map adjustment based on gear and speed)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
With gear position input (sold separately) connected, the PC 5 is capable of allowing each cylinder to be mapped individually and for each gear
Unit has a -100/+250% fuel change range (up from -100/+100% on the PCIII)
10 throttle position columns (up from 9 on PCIII USB)
Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
Capable of Auto tuning with the Optional Auto Tune Module shown below.

Fitment:

V Star 950 (2009 - Current)

	Sug. Retail $~~419.95~~ PCS Price $389.95
SAVE$$ Package Special PC 5 and Auto Tune Module (below)
	Sug. Retail $~~679.90~~ PCS Price $649.95

22-009

Yamaha V Star 950 Power Commander V (fuel and ignition) 22-048

V Star 950 Power Commander 5 (fuel and ignition)

The New Power Commander V is loaded with tons of new features for your Yamaha V Star 950. Below you will find some Power Commander V features:

USB powered from computer (9 volt adapter is no longer needed for programming)
2 position map switching function built in (map switch not included) Gear input (allows for map adjustment based on gear and speed)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
With gear position input (sold separately) connected, the PC 5 is capable of allowing each cylinder to be mapped individually and for each gear
Unit has a -100/+250% fuel change range (up from -100/+100% on the PCIII)
10 throttle position columns (up from 9 on PCIII USB)
Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
Capable of Auto tuning with the Optional Auto Tune Module shown below
Allows +/- 20 degrees of timing adjustment
Adjust timing per cylinder
Raise your Rev Limit (only available on select models)
Built In Launch Limiter

Fitment:

V Star 950 (2009 - Current)

	Sug. Retail $~~449.95~~ PCS Price $426.95
SAVE$$ Package Special PC 5 and Auto Tune Module (below)
	Sug. Retail $~~744.90~~ PCS Price $684.95

22-048

V Star 950 Power Commander FC

The Power Commander FC is a new plug-n-play fuel management device pre-programmed with Make/ Model specific maps. In addition the Power Commander FC has the added ability to modify or change these maps on the fly without a computer. Users can literally select between a Power Commander FC Map, custom-built maps, or even fine tune low, mid or high rpm ranges while sitting on the bike and without plugging into a computer. Standard +/- 10% increments from selected map settings, different ranges are available using the supplied Control Center software. Users can also load up to 10 of their personally built Power Maps into the Power Commander FC and select between them while in the saddle - eliminating the need to "re-boot" with the computer every time a new map is desired.

Uses OEM style connectors and high quality wiring harnesses
Small, lightweight and easy-to-fit on the bike
Pre-programmed with PCFC Power Maps specific to make, model
No computer necessary for modifying fuel management
Fully adjustable computer compatibility for ultimate tuning and personalization
Software is compatible with Power Commander, so you can download Power Commander maps to the PCFC
Integrated O2 Optimizer where Applicable
+250 / -100 fuel change. Enough adjustment to cover almost all modifications
Enhanced “accel pump” utility (increased adjustment and sensitivity ranges). When you need to adjust your fuel curve for quick throttle inputs.

Fitment: