1 1/4" Drag Bars
Fits all Yamaha Stars and bikes
with 100mm (4") riser spread. Bars come drilled for
internal wiring. Made in the USA
and Brilliantly show chromed (unless otherwise noted)
V-Star 1300/Stryker Will require relocation of
Speedometer
Drag bars Require
1/2 x 13 x 2 1/2 bolts for installation.
___________________________________________________________
Pacific Coast Star's Carlini Exclusives!
Put these bars on your Yamaha STAR and you will be riding with the industries most desired
and copied bars. These flawlessly chromed 1 1/2" bars will make a bold statement, and turn heads wherever you ride. We have installed these on
many of our show/magazine bikes, and people RAVE about them wherever they go. These bars all come pre-drilled for internal wiring . Make no mistake, these are no "Ordinary" bars, and once you see them you will agree.
V-Star 1300/Stryker Will require relocation of
Speedometer
|
Drag Exclusive
|
1 1/2" Carlini Drag Bar
Now exclusively sold through Pacific Coast Star, the Carlini 1 1/2" Drag bars. Fits all Yamaha Stars and bikes
with 100mm (4") riser spread. Bars come slotted and drilled for
internal wiring.
- Brilliantly Polished and Show Chromed
- Designed to work with Stock Controls
- Made in the USA
- 7" Rise
- 7" Pullback
- 31 1/2" Width
|
Super Sweep Exclusive!
|
1 1/2" Carlini Super Sweep Bar
Now exclusively sold through Pacific
Coast Star, the Carlini 1 1/2" Super Sweep bars. Fits all Yamaha Stars and bikes
with 100mm (4") riser spread. Bars come slotted and drilled for
internal wiring.
- Brilliantly Polished and Show Chromed
- Designed to work with Stock Controls
- Made in the USA
- 9" Rise
- 11" Pullback
- 31 1/2" Width
|
SlickBack Exclusive!
 |
1 1/2" Carlini SlickBack Bar
Now exclusively sold through Pacific
Coast Star, the Carlini 1 1/2" SlickBack bars. Fits all Yamaha Stars and bikes
with 100mm (4") riser spread. Bars come slotted and drilled for
internal wiring.
- Brilliantly Polished and Show Chromed
- Designed to work with Stock Controls
- Made in the USA
- 7" Rise
- 15" Pullback
- 32" Width
|
Carlini bars require mount bolts
1/2 x 13 x 2 1/2
Some drag bars may not have gas tank clearance with
stock controls. It is your responsibility to check clearances before
purchasing drag bars. Please call us with any questions on how to measure
rise and pullback. ALWAYS check control clearances to gas tank before making
full turns. V-Star 1300 Will require relocation of Speedometer.
Handlebars do not ship with mounting bolts unless otherwise noted. Please
call us for information on bolt sizes if needed.
0601-0477, 0601-0478, 0601-0479, 0601-0481, 0601-0483, 0601-0484,
0601-0480, 0601-0482
Join
Email List
