BEFORE AND AFTER
 

WARRIOR LOWERING KIT

• PCS Designed for your Warrior to lower your ride by approximately 1 3/4" from stock.
• Gives your bike a tough lowered look, eases handling and lowers the center of gravity.
• Does Not require replacing expensive bearings, collars or seals
• Does Not soften or stiffen your rear spring rate like kits sold by other manufacturers. 
• The kit easily installs with a few basic tools
• Comes with complete simple instructions
  
  FITS ALL YEARS!!!
  

Here's the package many of you have requested!

• Contains our best selling lowering kits (shown above)
• Contains Progressive Rear Spring (shown below)
• Discounted 10% savings to you.

PROGRESSIVE REAR SPRING

• Our Progressive rated springs are the most advanced in the industry.

• Provides a progressive spring rate which adjusts as needed from 825lb to 1250lb as you ride. No "straight weight " spring can come close to matching it's performance and comfort.

• Gives you the confidence needed to perfectly complement your driving conditions.

• Designed to work with your stock shock.

RS WARRIOR AIR RIDE

This kit will include all the components you will need to install the Air Lift. Our Air ride is built by one of the top quality manufactures in the industry featuring the triple threat exclusive seal design. Major components include: the lift cylinder, high quality air pump, mounting clevis, all tubing and fittings, additional hardware, control panel with buttons to fully adjust the 5" height  range (both up and down) and wiring harness including an electronic dump valve generally only found in much more expensive units. FULL 1 YEAR MANUFACTURERS WARRANTY.

RS WARRIOR AIR RIDE w/ AIR LOCK EQ

Same as above Air Ride system with the new advance Air Lock EQ system. This system improves control characteristics with an additional micro-valve configuration which allows you to have total control over ride height AND rebound. Our Air Lock EQ is the most advanced system on the market today. With the dual toggle switch design, simply flip both switches up to raise the bike. Next, use the main toggle to lock in the piston position. Finally, use either toggle to adjust the locked in your preferred rebound or comfort settings. From soft to firm, it's that easy. Oppose the switches, to drop the bike all the way down.

AIR RIDE Remote add on

Remote control for your Air Ride system. Retrofit this kit with our current toggle switch design.